Radiosity
The first two images at left are screen shots from an Open Inventor 3D model of a light box used to model the box shown in the bottom left image. A blue cover was placed over the front with a 5x6 grid of wholes cut out so pictures could be taken at each grid point. For each image, the camera was pointed straight ahead (or as close as possible) to capture the incident radiance at that point. Once all images were taken, the average value of each image was found and these averages were used to create one blurry image of the total average incident radiance. The initial images along with their average values, the blurry image, and the Open Inventor source code can be found below. Unblurred Blurred Makefile main.cpp gfront.rgb proj04.tar.gz